1,000,000,000+
Seconds of music visualized
As of May 2026, the platform has rendered over 1 billion seconds of AI music visuals.
Free AI Stem Splitter: Extract Vocals, Drums, Bass & More
Upload a song or video and this AI stem splitter pulls out clean vocal, drum, bass, and guitar tracks in one pass. Switch which stem you want without re-uploading, and export free, with no paywall.
Why Creators Use This
Why Use a Free AI Stem Splitter Instead of a Paid One?
Most stem separation tools cap free use at a handful of uploads a month, or charge for more instruments and higher-quality models. This stem splitter extracts vocals, drums, bass, and more, at no cost, with no upload cap and no paid tier standing between you and a clean export.
1,000,000+
Creators worldwide
As of May 2026, the platform has served over 1 million creators across the world.
Over 150
Countries resonated
As of May 2026, creators from more than 150 countries have built music videos with this platform.
How It Works
How Do You Split a Song Into Stems?
From a song or video to isolated stems in three steps.
01
Upload your song or video
Add an audio or video file in any common format. The splitter reads the full track and prepares it for separation, with no need to trim it down to a short clip first before uploading.
02
Choose which stems to extract
Pick vocals, instrumental, drums, bass, guitar, piano, synth, strings, or wind instruments, depending on what the track supports. Switch to a different stem later on the same upload, without adding the file again from scratch.
03
Preview, then export
Compare separation models on a short preview clip, pick whichever result sounds cleanest for that specific track, then export free in your chosen format, with no watermark stamped onto the finished file.
Core Capabilities
What Can This AI Stem Splitter Do?
One upload, several stems, and control over the output.
MULTI-STEM
Extract Vocals, Drums, Bass, and More From One Upload
Pull vocals, instrumental, drums, bass, guitar, piano, synth, strings, or wind instruments from a single uploaded track. Switch between stem types without uploading the file again, so getting a drum track and then a separate bass track from the same song only takes two selections, not two separate uploads or a second trip through the whole process.
- 8+ stem types available
- Switch stems without re-uploading
- Works from an uploaded song or video
OUTPUT FORMAT
Export in the Format You Need
Keep the original file format, or export the separated stem into a different audio format so it matches whatever you are dropping it into next, whether that's a digital audio workstation, a video editor, or a simple music player. That flexibility matters if your workflow expects a specific format rather than whatever format the original upload happened to already be in.
- Keep the original format
- Export into a different audio format
- Matches common production workflows
MODEL CHOICE
Compare Separation Models Before You Commit
Different tracks split more cleanly with different separation models. A live recording with room reverb might do better with one model, while a dense studio mix might separate more cleanly with another. Preview a short clip with each option and pick the one that sounds cleanest for that specific song before running the full split, instead of being locked into a single fixed default.
- Multiple separation models available
- Preview before the full split
- Pick per-track, not a fixed default
VOCAL CLARITY
Reduce Reverb and Echo on the Vocal Stem
Recordings with natural room sound or stage reverb can bleed into the isolated vocal stem, especially on live recordings or tracks captured in a reflective space. A reverb and echo reduction option makes the vocal track sound drier and closer to a studio-recorded take. It is optional, so a cleanly recorded studio track does not need it, but a live recording usually benefits from switching it on.
- Reduces room reverb on vocal stems
- Cuts echo bleed from live recordings
- Optional, applied only when you need it
KARAOKE READY
Get a Clean Instrumental for Karaoke or Practice
Split out the vocal track to leave a clean instrumental behind, ready for a karaoke track, a rehearsal backing track, or the base layer of a remix, without the original singer bleeding through. This site's dedicated karaoke track maker runs the same vocal-removal step automatically, so a plain karaoke-ready track is one option among several this same engine supports.
- Clean vocal-removed instrumental
- Useful for karaoke, practice, and remixing
- Same engine as this site's other splitter tools
ALSO ON THIS SITE
Beyond Stem Splitting: Lyrics Videos and Singing Photos
Splitting stems is one part of what this site does. If you want a synced lyrics video built around a song, the lyrics video maker and karaoke video maker time the words to the track automatically. If you'd rather turn a photo into a singing or talking video, the AI singing photo and lip sync tools run on a separate photo-animation engine, free and watermark-free like everything else here.
- Lyrics video and karaoke video tools available
- AI singing photo and lip sync tools available
- Free across all three, not just this one
Side-by-Side
How Does This AI Stem Splitter Compare?
Where this stem splitter differs from three well-known separation tools.
Feature
karaokemaker.ai
LALAL.AI
Moises.ai
Ultimate Vocal Remover
Price
Completely free, no paywall
Free preview, paid plan for full splits, per LALAL.AI
Free tier capped at 5 uploads a month, per Moises.ai
Free, but a self-installed desktop app, per Ultimate Vocal Remover
Setup required
None, runs in the browser
None, browser-based, per LALAL.AI
None, browser or app, per Moises.ai
Desktop install and a capable GPU recommended, per Ultimate Vocal Remover
Stem types
Vocals, drums, bass, guitar, piano, synth, strings, wind instruments
Multiple stems, per LALAL.AI
4 stems on the free tier, more on paid tiers, per Moises.ai
Many stems via selectable models, per Ultimate Vocal Remover
Output format choice
Keep original or export to another format
Multiple export formats, per LALAL.AI
Limited on the free tier, per Moises.ai
Depends on the selected model, per Ultimate Vocal Remover
Model choice with preview
Yes, compare models before the full split
Yes, per LALAL.AI
Higher-quality models on paid tiers only, per Moises.ai
Yes, dozens of selectable models, per Ultimate Vocal Remover
Karaoke-ready vocal removal
Yes, built into every split
Not the main focus, per LALAL.AI
Not the main focus, per Moises.ai
Yes, a common use case, per Ultimate Vocal Remover
Upload limits
No fixed monthly upload cap
Limits vary by plan, per LALAL.AI
5 uploads a month on the free tier, per Moises.ai
No cap, processed locally, per Ultimate Vocal Remover
Setup or install needed
None, runs in the browser
None, browser-based, per LALAL.AI
None, browser or app, per Moises.ai
Desktop install and model selection knowledge, per Ultimate Vocal Remover
Why It's Worth Using
What Do You Get From This Stem Splitter?
Clean stems, format flexibility, and zero cost.
One Upload, Every Stem You Need
Extract vocals, drums, bass, and more from the same uploaded file, switching between stem types without uploading again each time, which turns a multi-stem project into a handful of selections rather than repeated uploads.
Pick the Model That Sounds Best
Preview a short clip across different separation models and choose the cleanest result for that specific track, instead of accepting whatever a single fixed default model happens to produce on a given recording.
Export Ready for Your Workflow
Keep the original format or export to another one, so the stem drops straight into your existing project, whether that's a digital audio workstation, a video editor, or a simple music player.
No Cost, No Cap
No paywall, no watermark, and no monthly upload limit standing between you and a finished stem, whether it's the first track you've split today or the tenth.
Explore More
More Free Stem and Audio Splitting Tools
Other free ways to pull a clean track out of a song.
Free Karaoke Track MakerFree Vocal RemoverFree AI Audio SplitterFree Voice DeleterDrum SplitterBass SplitterVocal SplitterInstrumental SplitterVoice SplitterNoise SplitterElectric Guitar SplitterAcoustic Guitar SplitterGuitar SplitterPiano SplitterSynthesizer SplitterStrings SplitterWind Instrument SplitterVocal and Instrumental Splitter
What Creators Say
What Do Creators Say About This Stem Splitter?
Feedback from musicians, editors, and remixers.
4.8/5
★★★★★
From 1,000,000+ creators Featured on
RC
Rafael Costa
Remix Producer, Sao Paulo
★★★★★
Pulled a clean acapella off an old track in under a minute for a remix I was building. Tried two of the separation models before picking one, which I did not expect from a completely free tool.
HK
Hannah Kim
Vocal Coach, Seoul
★★★★★
I use the instrumental splits for practice tracks with students throughout the week. No watermark, no monthly cap on how many songs I process, and the vocal reverb reduction actually helps on recordings from a live lesson.
OF
Owen Fitzgerald
Video Editor, Dublin
★★★★☆
Extracted an instrumental to sit under a voiceover for a client video on a tight deadline. The export format options covered what I needed without a separate conversion step afterward, which saved a real chunk of time.
NA
Ngozi Adeyemi
Bedroom Producer, Lagos
★★★★★
Split drums and bass separately from the same upload for a sample chop project over the weekend. Switching stems without re-uploading the file each time saved a genuine amount of back and forth.
SM
Sofia Marchetti
Podcast Editor, Rome
★★★★★
Used the noise reduction option to clean up an old interview recording before isolating the voice track for a re-edit. Did not expect that level of control from a tool that costs nothing to use.
TH
Tariq Hassan
DJ, Manama
★★★★☆
Split a track into 4 separate stems for a live mashup set I was preparing. Comparing separation models took an extra minute or two, but the cleaner result was worth the small delay before a gig.
Who It's For
Who Uses This AI Stem Splitter?
Built for anyone who needs a clean, isolated track from a song, free.
Remix Producers
Pulling clean vocal, drum, or bass stems out of an existing track to rebuild it into a remix or mashup, without needing the original multitrack session file that most producers never have access to in the first place.
Musicians and Vocal Coaches
Creating instrumental backing tracks for practice or rehearsal without the original vocal in the way, so a student or bandmate can hear their own timing against the music instead of singing over someone else's recorded performance.
Video Editors
Extracting a clean instrumental to sit under narration or a voiceover in a video edit, without the original song's vocal competing with the spoken track for the viewer's attention during playback.
Sample-Based Producers
Chopping clean isolated stems from songs for sampling, with less bleed from other instruments than a standard audio clip would carry, making individual hits and phrases easier to loop and rearrange cleanly.
Common Questions
Common Questions About This AI Stem Splitter
Cost, formats, and what stems you can extract.
Is this stem splitter actually free?
Yes, this AI stem splitter is completely free. Extracting vocals, drums, bass, guitar, piano, synth, strings, or wind instruments exports at no cost, with no watermark stamped onto the file and no paid tier gating higher-quality output. That is different from tools like Moises.ai, which caps free use at 5 uploads a month, or LALAL.AI, which limits free use to a preview before charging for the full split. There is no monthly upload cap here to run into.
Which stems can I extract?
This stem splitter extracts 8 stem types: vocals, instrumental, drums, bass, guitar, piano, synth, strings, and wind instruments, all from the same uploaded song or video. You can switch between stem types after the first upload without adding the file again, so pulling both a drum track and a separate bass track from one song takes two selections, not two uploads.
Can I export in a specific format?
Yes. Once a stem is separated, you can keep the original file format or export it into a different audio format so it matches whatever you are dropping it into, whether that is a digital audio workstation, a video editor, or a music player. This flexibility matters if your workflow expects a specific format rather than whatever format the original upload happened to be in.
What does the model choice option do?
Different AI separation models handle different kinds of recordings better. A live recording with room reverb might split more cleanly with one model, while a dense studio mix might do better with another. This stem splitter lets you preview a short clip using more than one model before committing to the full split, so you can compare results and pick whichever sounds cleanest for that specific track.
Can I use this to make a karaoke track?
Yes. Splitting out the vocal stem from a song leaves a clean instrumental track underneath, which works as a karaoke backing track, a rehearsal track for practicing vocals, or the base layer for a remix. This site also has a dedicated karaoke track maker that runs the same vocal-removal engine automatically, so you can go straight to a karaoke-ready track without manually selecting the vocal stem yourself.
How is this different from Moises.ai or LALAL.AI?
The core difference is cost. Moises.ai's free tier caps out at 5 uploads a month, and LALAL.AI only gives a free preview before charging for the full split. This stem splitter has no upload cap and no paywall standing between a preview and a finished export. The stem types on offer, vocals, drums, bass, guitar, piano, synth, strings, and wind instruments, are comparable to both, but here every one of them exports free, every time.
Do I need to install anything to use this?
No. This stem splitter runs in the browser, so there is nothing to download or install. That is different from Ultimate Vocal Remover, a genuinely free tool but a desktop application that needs installing locally and benefits from a capable GPU. If you want a browser-based option with no setup step, upload a song here instead of installing a separate application.
What does vocal reverb reduction do and when should I use it?
Vocal reverb reduction targets room sound or stage reverb that bleeds into an isolated vocal stem, most noticeable on live recordings or tracks recorded in a reflective space. Turning it on makes the separated vocal sound drier and closer to a studio-recorded take. It is optional, so a track recorded cleanly in the first place does not need it, but a live recording or an old cassette rip usually benefits from switching it on.
Can I split a video file, not just audio?
Yes. You can upload a video file directly and this stem splitter extracts the audio stems from it, the same as it would from a standalone audio file. That is useful if you want to pull an instrumental out of a music video, or isolate dialogue and remove background music from a video clip without extracting the audio track yourself first.
Is there a limit to how many songs I can split?
No fixed monthly cap. Unlike Moises.ai, which limits free users to 5 uploads a month, this stem splitter does not meter how many songs you can process. You can split as many tracks as you need, switching between stem types on each one, without hitting an upgrade prompt partway through a project.
Do I lose audio quality when splitting a stem?
Separation quality depends on the source recording and which model handles it best, which is why comparing models with a short preview before the full split matters. Choosing the model that sounds cleanest on that specific track, rather than accepting a single fixed default, is the main way to keep the separated stem as close to the original as possible.
- Is this stem splitter actually free?
- Yes, this AI stem splitter is completely free. Extracting vocals, drums, bass, guitar, piano, synth, strings, or wind instruments exports at no cost, with no watermark stamped onto the file and no paid tier gating higher-quality output. That is different from tools like Moises.ai, which caps free use at 5 uploads a month, or LALAL.AI, which limits free use to a preview before charging for the full split. There is no monthly upload cap here to run into.
- Which stems can I extract?
- This stem splitter extracts 8 stem types: vocals, instrumental, drums, bass, guitar, piano, synth, strings, and wind instruments, all from the same uploaded song or video. You can switch between stem types after the first upload without adding the file again, so pulling both a drum track and a separate bass track from one song takes two selections, not two uploads.
- Can I export in a specific format?
- Yes. Once a stem is separated, you can keep the original file format or export it into a different audio format so it matches whatever you are dropping it into, whether that is a digital audio workstation, a video editor, or a music player. This flexibility matters if your workflow expects a specific format rather than whatever format the original upload happened to be in.
- What does the model choice option do?
- Different AI separation models handle different kinds of recordings better. A live recording with room reverb might split more cleanly with one model, while a dense studio mix might do better with another. This stem splitter lets you preview a short clip using more than one model before committing to the full split, so you can compare results and pick whichever sounds cleanest for that specific track.
- Can I use this to make a karaoke track?
- Yes. Splitting out the vocal stem from a song leaves a clean instrumental track underneath, which works as a karaoke backing track, a rehearsal track for practicing vocals, or the base layer for a remix. This site also has a dedicated karaoke track maker that runs the same vocal-removal engine automatically, so you can go straight to a karaoke-ready track without manually selecting the vocal stem yourself.
- How is this different from Moises.ai or LALAL.AI?
- The core difference is cost. Moises.ai's free tier caps out at 5 uploads a month, and LALAL.AI only gives a free preview before charging for the full split. This stem splitter has no upload cap and no paywall standing between a preview and a finished export. The stem types on offer, vocals, drums, bass, guitar, piano, synth, strings, and wind instruments, are comparable to both, but here every one of them exports free, every time.
- Do I need to install anything to use this?
- No. This stem splitter runs in the browser, so there is nothing to download or install. That is different from Ultimate Vocal Remover, a genuinely free tool but a desktop application that needs installing locally and benefits from a capable GPU. If you want a browser-based option with no setup step, upload a song here instead of installing a separate application.
- What does vocal reverb reduction do and when should I use it?
- Vocal reverb reduction targets room sound or stage reverb that bleeds into an isolated vocal stem, most noticeable on live recordings or tracks recorded in a reflective space. Turning it on makes the separated vocal sound drier and closer to a studio-recorded take. It is optional, so a track recorded cleanly in the first place does not need it, but a live recording or an old cassette rip usually benefits from switching it on.
- Can I split a video file, not just audio?
- Yes. You can upload a video file directly and this stem splitter extracts the audio stems from it, the same as it would from a standalone audio file. That is useful if you want to pull an instrumental out of a music video, or isolate dialogue and remove background music from a video clip without extracting the audio track yourself first.
- Is there a limit to how many songs I can split?
- No fixed monthly cap. Unlike Moises.ai, which limits free users to 5 uploads a month, this stem splitter does not meter how many songs you can process. You can split as many tracks as you need, switching between stem types on each one, without hitting an upgrade prompt partway through a project.
- Do I lose audio quality when splitting a stem?
- Separation quality depends on the source recording and which model handles it best, which is why comparing models with a short preview before the full split matters. Choosing the model that sounds cleanest on that specific track, rather than accepting a single fixed default, is the main way to keep the separated stem as close to the original as possible.